Chapter 4: Managing Your Network | 53
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500 User Manual
When uploading firmware to the wireless modem router, do not
interrupt the Web browser by closing the window, clicking a link,
or loading a new page. If the browser is interrupted, it could
corrupt the firmware..
When the upload is complete, your wireless modem router automatically restarts. The
upgrade process could take a few minutes. Read the new firmware release notes to
determine whether you must reconfigure the Wireless Modem Router after upgrading.
Manually Checking for Firmware Upgrades
You can use the Router Upgrade screen to manually check the NETGEAR website for newer
versions of firmware for your product.
To manually check for new firmware and install it on your wireless modem router:
1. Und
er Maintenance on the main menu, select Router Status. Note the version number
of your wireless modem router firmware.
2. Go
to the DGN3500 support page on the NETGEAR website at
http://www.netgear.com/support.
3. If the firmware versio
n on the NETGEAR website is newer than the firmware on your
wireless modem router, download the file to your computer.
4. Unde
r Maintenance on the wireless modem router main menu, select Router Upgrade to
display the following screen:
Figure 28.
5. Click Browse, and locate the firmware you downloaded (the file ends in .img or .chk).
6. Click Upl
oad to send the firmware to the wireless modem router
To Next Page
Loading...
Need help?
General
