Chapter 1: Connecting Your Router to the Internet | 9
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500 User Manual
Using the Setup Wizard
You can manually configure your Internet connection using the Basic Settings screen, or you
can allow the Setup Wizard to detect your Internet connection. The Setup Wizard searches
your Internet connection for servers and protocols to determine your ISP configuration. This
feature is not the same as the Smart Wizard on the Resource CD that is used for installation.
To use the Setup Wizard:
1. T
o go to the Setup Wizard screen, from the top of the main menu, select Setup Wizard.
Figure 4.
2. Select Yes for the Auto-Detect Connection Type, and then click Next to proceed.
3. Ente
r your ISP settings, as needed.
4. At the end
of the Setup Wizard, click Test to verify your Internet connection. If you have
trouble connecting to the Internet, see Chapter 7, Troubleshooting.
To Next Page
Loading...
Need help?
General
