8 | Chapter 1: Connecting Your Router to the Internet
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500 User Manual
Figure 2.
Note: If the wireless modem router is not configured (is in its factory
default state) when you log in, the Setup Wizard displays. See
Using the Setup Wizard on page 9.
If the wireless modem router discovers a newer version o
f the firmware, you are asked if
you want to upgrade to the new firmware (see Upgrading the Firmware on p
age 52 for
details). If no new firmware is available, the following message displays.
Figure 3.
• Router Status screen. The Router Status screen displays if the wireless modem router
has not been configured yet or has been reset to its factory default settings. See Viewing
N300 Wireless Modem Router Status Information on p
age 55.
You can use the Setup Wizard to automatically detect your Internet connection as
describ
ed in Using the Setup Wizard o
n page 9, or you can bypass the Setup Wizard
and manually configure your Internet connection as described in Viewing or Manually
Configuring Your ISP Settings on p
age 10.
To Next Page
Loading...
Need help?
General
