Chapter 1: Connecting Your Router to the Internet | 6
1. Connecting Your Router to the Internet
This chapter describes how to configure your N300 Wireless Modem Router Internet connection.
When you install your wireless modem router using the Resource CD as described in the Setup
Manual, these settings are configured automatically for you. This chapter provides instructions
on how to log in to the wireless modem router for further configuration.
Note: NETGEAR recommends that Windows OS users use the Smart
Wizard™ on the Resource CD for initial configuration
. Mac and
Linux OS users should access the
Setup Manual on the Resource
CD.
This chapter includes:
• Logging In to Your N300 Wireless Modem Router
• Using the Setup Wizard
• Viewing or Manually Configuring Your ISP Settings
• Configuring ADSL Settings
Using the Setup Manual
For first-time installation of your wireless wireless modem router, refer to the Setup Manual.
The Setup Manual explains how to launch the NETGEAR Smart Wizard on the Resource CD
to step you through the procedure to connect your wireless modem router and computers.
The Smart Wizard will assist you in configuring your wireless settings and enabling wireless
security for your network. After initial configuration using the Setup Manual, you can use the
information in this Reference Manual to configure additional features of your wireless
wireless modem router.
For installation instructions in a language other than English, see the language options on the
Resource CD.
To Next Page
Loading...
Need help?
General
