NETGEAR GS108T - ProSafe - Gigabit Smart Switch User Manual

GS108T Smart Switch Software Administration Manual
About This Manual xi
v1.0, December 2007
• Chapter 6, “Monitoring, Maintenance, and Help,” describes the logs, the reset functions, the
firmware upgrade procedure, and the help options.
• Appendix A, “Specifications and Default Values,” gives GS108T Smart Switch specifications
and lists default feature values.
• Appendix B, “Virtual Local Area Networks (VLANs),” describes some concepts of VLANs.
• Appendix C, “Network Cabling,” gives cabling requirements and describes some details of
port cabling connections.
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical conventions. This manual uses the following typographical conventions:
• Formats. This manual uses the following formats to highlight special messages:
Note: See the product release notes for the GS108T Smart Switch Software application
level code. The release notes detail the platform-specific functionality of the
Switching, SNMP, Config, and Management packages.
Italics Emphasis, books
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
Italics URL links
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note might result in a malfunction or damage to the
equipment.

NETGEAR GS108T - ProSafe - Gigabit Smart Switch Specifications

General

Model	GS108T
Product Line	ProSafe
Form Factor	Desktop
Power Supply	External Power Adapter
Layer	Layer 2
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
PoE	No
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Ports	8 x 10/100/1000
Management	Smart
MAC Address Table Size	8K entries
Remote Management Protocol	SNMP, RMON, HTTP, HTTPS
Features	VLAN support, QoS, IGMP snooping
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 to 50°C (32 to 122°F)
Certifications	CE, FCC
Jumbo Frame Support	Supported, up to 9, 000 bytes