NETGEAR GS108T - ProSafe - Gigabit Smart Switch - Port-Based VLAN Configuration

GS108T Smart Switch Software Administration Manual
Configuring Switching 4-11
v1.0, December 2007
To change a VLAN name:
a. Select the check box to the left of the VLAN ID that you want to change.
b. Enter a new name in the VLAN Name field.
c. Click Apply.
Port-Based VLAN Configuration
To configure the port-based VLAN type:
1. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the following
displays.
2. Select the Port-Based radio button to specify the port-based VLAN type.
3. The Warning screen displays. Click OK.
4. In the VLAN Name field, enter an optional VLAN name.
Figure 4-8
Warning: Changing the VLAN type erases all existing VLAN settings, static
multicast groups, and trusted MAC addresses.