GS108T Smart Switch Software Administration Manual
4-10 Configuring Switching
v1.0, December 2007
.
2. Select the IEEE 802.1Q radio button to specify the IEEE 802.1Q VLAN type.
3. The Warning screen displays. Click OK.
The following information about the VLAN configuration is displayed. Both the VLAN ID
and VLAN Name fields are configurable:
• VLAN ID. Specifies a VLAN ID from 1 to 4094.
• VLAN Name. Specifies the optional VLAN description.
4. Perform one of the following actions:
To add a VLAN:
a. Enter a number in the VLAN ID field.
b. Enter a name in the VLAN Name field.
c. Click Add.
To delete a VLAN:
a. Select the check box to the left of the VLAN ID that you want to remove.
b. Click Delete.
Figure 4-7
Warning: Changing the VLAN type erases all existing VLAN settings, static
multicast groups, and trusted MAC addresses.
To Next Page
Loading...
