NETGEAR GS108T - ProSafe - Gigabit Smart Switch - GS108 T Gigabit Smart Switch Features and Defaults

GS108T Smart Switch Software Administration Manual
A-2 Specifications and Default Values
v1.0, December 2007
GS108T Gigabit Smart Switch Features and Defaults
Table A-3. Port Characteristics
Feature Sets Supported Default
Autonegotiation /
static speed / duplex
8 (per port) Autonegotiation
Auto MDI/MDIX N/A Enabled
802.3x flow control /
back pressure
8 (per-port) Enabled
Port mirroring 1 Disabled
Port trunking (aggregation) 2 Disabled
802.1D spanning tree 1 Disabled
802.1w RSTP 1 Disabled
IGMP snooping 1 Disabled
Static 802.1Q tagging 256 VID = 1
MemberPorts = [1–8]
Port based private VLAN 8 X 1 MemberPorts[1] = [1–8]
Learning process N/A N/A
Table A-4. Quality Of Service
Feature Sets Supported Default
Number of queues N/A N/A
Port based 8 (per port) Normal for all ports
802.1p 1 Disabled
DSCP 1 Disabled
Table A-5. Security
Feature Sets Supported Default
IP access list 10 All IP addresses allowed
Password control access 1 Idle timeout = 5 mins.
Password = “password”