NETGEAR GS108T - ProSafe - Gigabit Smart Switch - Index

Index-1
v1.0, December 2007
Index
A
access list 5-19
C
cabling C-1
Category 5 cables C-1
changing the password 1-8, 5-6
configuration
backing up the configuration 6-19
configuration files 6-19, 6-20
configuration logs 6-9
LLDP configuration 3-7, 3-9
port switching configuration 4-2
resetting the switch with its current configuration 6-17
restoring the switch to the factory default configuration
6-18
setting the network parameters 1-5
spanning tree configuration 4-17
switching configuration 4-1
system configuration 3-1
VLAN configuration examples B-2
connectors C-6
CoS 5-1
D
defaults
default IP address 1-7
default subnet mask 1-7
factory default configuration 6-18
switch defaults A-2
DHCP
DHCP server 1-3
installing the switch in a network with a DHCP server
1-3
dynamic MAC address 4-26
E
EAP 6-5
F
factory reset 6-18
Fast Ethernet cables C-1
file management
file download management 6-20
file upload management 6-19
G
getting started 1-1
H
HTTP host 6-20, 6-21
I
IEEE 802.1D 4-17
IEEE 802.1p 5-1
IEEE 802.1Q 4-9, 4-12, B-2
IEEE 802.3ad 4-4
IEEE 802.3u C-1
IGMP 4-20
installing the switch
in a network with a DHCP server 1-3
in a network without a DHCP server 1-4
IP configuration
default IP address 1-7
general IP configuration 3-3
IP access list 5-19