NETGEAR GS108T - ProSafe - Gigabit Smart Switch - Page 138

GS108T Smart Switch Software Administration Manual
Index-2
v1.0, December 2007
J
jumbo frame 4-24
L
LACP 4-7
link aggregation 4-4
LLDP
LLDP configuration 3-7, 3-9
LLDP port settings 3-9
LLDP statistics 6-15
local information 3-11
logging in to the switch 2-1
logs
configuring logs 6-9
flash logs 6-12
memory logs 6-11
server logs 6-13
M
MAC addresses
dynamic MAC address 4-26
MAC address table 4-25
static MAC address 4-25
trusted MAC address 5-21
management security 5-6
managing files 6-19, 6-20
menus 2-2
mirroring 6-8
MSAP 3-9
multicast 4-20
IGMP snooping 4-20
multicast group membership 4-23
static multicasting 4-22
N
navigation tabs 2-2
network parameters 1-5
NIC settings 1-5
P
password changing 1-8, 5-6
patch panels C-3
port
LLDP port settings 3-9
port authentication 5-13
port mirroring 6-8
port security 5-18
port switching configuration 4-2
PVID 4-15
Q
QoS
801.1p to queue mapping 5-4
802.1-based QoS 5-1
DSCP priority mapping 5-4
DSCP-based QoS 5-2
rate limiting 5-2
R
RADIUS
RADIUS authentication type 5-9
RADIUS port authentication 5-10
RADIUS server 5-7
reset
resetting the switch with its current configuration 6-
17
restoring the switch to the factory default
configuration 6-18
RSTP configuration 4-17
S
security 5-6, 5-18
SNMP 3-6
SNTP 3-4
spanning tree 4-17
specifications A-1
static MAC address 4-25
statistics
802.1x accounting statistics 6-7
EAP statistics 6-5