GS108T Smart Switch Software Administration Manual
4-26 Configuring Switching
v1.0, December 2007
3. Perform one of the following actions:
To add a static entry:
a. Select an interface from the drop-down list.
b. Enter a MAC address.
c. Select a VLAN ID from the drop-down list.
d. Click Add.
To delete a static entry:
a. Select the check box to the left of the static address that you want to remove.
b. Click Delete.
Dynamic Address
The Dynamic Address screen lets you to query the dynamically assigned MAC addresses by port,
VLAN ID, and MAC address. Static MAC addresses might also be shown in the table entries that
are returned by the query. To query the table:
1. Select Switching > Address Table > Dynamic Address. A screen similar to the following one
displays.
.
Figure 4-23
To Next Page
Loading...
