GS108T Smart Switch Software Administration Manual
Configuring Switching 4-19
v1.0, December 2007
2. You can make changes to the RSTP port settings for an individual port, for a group of ports, or
for all ports simultaneously:
• To change the RSTP port settings for an individual port, select the check box to the left of
its port number, and then select the RSTP port settings.
• To change the RSTP port settings for a group of ports, select the check boxes to the left of
their port numbers, and then select the RSTP port settings.
• To change the RSTP port settings for all ports simultaneously, select the check box at the
top of the column of check boxes, and then select the RSTP port settings.
Figure 4-16
Note: You can also enter the interface number (that is, the port number) in the GO
TO INTERFACE field, and then click GO.
To Next Page
Loading...
