NETGEAR N600 User Manual

Advanced Settings
118
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Device Mode
When the wireless modem router is in Router mode, this screen allows switching to Modem
mode, where the wireless modem router acts as a pure bridge or DSL modem.
Routing, firewall, wireless support, USB, and th
e traf
fic meter are not available in Modem
mode. A typical application is a small-to-medium business scenario where the wireless
modem router is used for DSL connectivity behind a carrier class router or firewall or security
device manager. When the wireless modem router is in Modem mode, this screen allows
switching back to Router mode with all of the standard features.
 To switch the device mode:
1. Click Advanced > Advanc
ed Setup > Device Mode to display the following screen:
2. From the Device Mode list, select Router (Modem + Router) or Modem (Modem only).
3. Click Apply to save your settings.

NETGEAR N600 Specifications

General

Wi-Fi	Yes
Modulation	CCK, OFDM
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Security algorithms	40-bit WEP, 64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	600 Mbit/s
Interface	WLAN
USB version	2.0
Connectivity technology	Wireless
Internal	No
Certification	FCC, CE
Component for	PC/Laptop
Product color	Black
Operating temperature (T-T)	0 - 40 °C
Windows operating systems supported	Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP Home, Windows XP Professional

Weight and Dimensions

Depth	28 mm
Width	87 mm
Height	14 mm
Weight	19 g