NETGEAR N600

Genie Advanced Home
44
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Within two minutes, go to the client device and use its WPS software to join the
network without entering a password.
The wireless modem router attempts to a
dd the
WPS-capable device. The WPS LED
on the top of the wireless modem router blinks green. When the wireless modem
router establishes a WPS connection, the LED is solid green, an
d the wireless modem
router WPS screen displays a confirmation message.
4. Repeat Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup. T
his is a shortcut to the same Internet Basic Settings screen that you can
access from the dashboard on the Basic Home screen. See Internet Basic Settings on
page 29.
• ADSL Setup. Internet
(ADSL) setup. See ADSL Setup on page 45.
• Wireless Setup. This is a shortcut to the same Wireless Settings screen that you can
access from the
dashboard on the Basic Home screen. See Basic Wireless Settings on
p
age 34.
• Guest Network. This is a shortcut to
the same Wireless Settings (for guest networks)
screen that you can access from the dashboard on the Basic Home screen. See Guest
Networks on page 38
.
• WAN Setup.
Internet (WAN) setup. See WAN Setup on page 46.
• LAN Setup. Loca
l area network (LAN) setup. See LAN Setup on page 50.
• QoS Setup. Quality of Service
(QoS) setup. See Quality of Service (QoS) Setup on
page 53.