Administration
89
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Either you can use the Restore Factory Settings button on the back of the wireless modem
router (see Factory Settings on p
age 130), or you can click the Erase button in this screen.
Erase sets the user name to admin, the password to password, and the LAN IP address to
192.168
.1.1, and enables the wireless modem router’s DHCP.
Set Password
This feature allows you to change the default password that is used to log in to the wireless
modem router with the user name admin.
This is not the same as changing the password for wireless access. The label on the bottom
of you
r wireless modem router shows your unique wireless network name (SSID) and
password for wireless access (see Label on page 11).
To set the password for the user name admin:
1. Select Advanced > Admin
istration > Set Password to display the following screen:
2. Type the old password, and type the new password twice in the fields on this screen.
3. If you want
to be able to recover the password, select the Enable Password Recovery
check box.
4. Click Appl
y so that your changes take effect.
Password Recovery
NETGEAR recommends that you enable password recovery if you change the password for
the router’s user name of admin. Then you will have an easy way to recover the password if
it is forgotten. This recovery process is supported in Internet Explorer, Firefox, and Chrome
browsers, but not in the Safari browser.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
