NETGEAR N600

Get Started with NETGEAR Genie
23
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Types of Logins and Access
There are two separate types of logins that have different purposes. It is important that you
understand the difference so that you know which login to use when.
• W
ireless modem router login logs you in to the wireless modem router interface from
NETGEAR Genie. See Use NETGEAR Genie after Installation o
n page 24 for details
about this login.
Wireless network key or password. Y
our wireless modem router is preset with a unique
wireless network name (SSID) and password for wireless access. This information is on
the label located on the bottom of your wireless modem router.
• ISP login log
s you in to your Internet service. Your service provider has provided you with
this login information in a letter or some other way. If you cannot find this login
information, contact your service provider.
NETGEAR Genie Setup
NETGEAR Genie runs on any device with a web browser. It is the easiest way to set up the
wireless modem router because it automates many of the steps and verifies that those steps
have been successfully completed. It takes about 15 minutes to complete.
 To use NETGEAR Genie to set up your wireless modem router:
1. T
urn the wireless modem router on by pressing the On/Off button, if not done yet.
2. Ma
ke sure that your device is connected with an Ethernet cable to your wireless modem
router.
3. Launch your Int
ernet browser.
• If this is the
first time you are setting up the Internet connection for your wireless
modem router, the browser automatically goes to http://www.routerlogin.net, and the
NETGEAR Genie screen displays.
• If you already use
d the NETGEAR Genie, type http://www.routerlogin.net in the
address field for your browser to display the NETGEAR Genie screen. See Use
NETGEAR Genie after Installation on p
age 24.
4. Follow
the onscreen instructions to complete NETGEAR Genie setup. NETGEAR Genie
guides you through connecting the wireless modem router to the Internet.
 If the browser cannot display the web page:
• Make
sure that the computer is connected to one of the four Gigabit-Ethernet LAN ports,
or wirelessly to the wireless modem router.
• Make sure tha
t the wireless modem router is fully up and running. Its Wireless LEDs
should turn on.
• Close and
reopen the browser to make sure the browser does not cache the previous
page.
• Browse to http://route
rlogin.net.