NETGEAR N600 User Manual

130
A
A. Supplemental Information
Factory settings and technical specifications
This appendix provides factory default settings and technical specifications for the N600
Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2.
Factory Settings
You can return the wireless modem router to its factory settings. Use the end of a paper clip
or some other similar object to press and hold the Restore Factory Settings button on the
back of the router for at least five seconds. The wireless modem router resets and returns to
the factory settings.
Your device returns to the factory configuration settings shown in the
following table.
Table 13. Factory default settings
Feature Default Behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
conne
ction
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed Autosensing
Local network
(LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Allow a registrar to configure this
router
Enabled
DHCP starting IP address 192.168.1.2
DHCP ending IP address 192.168.1.254

NETGEAR N600 Specifications

General

Wi-Fi	Yes
Modulation	CCK, OFDM
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Security algorithms	40-bit WEP, 64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	600 Mbit/s
Interface	WLAN
USB version	2.0
Connectivity technology	Wireless
Internal	No
Certification	FCC, CE
Component for	PC/Laptop
Product color	Black
Operating temperature (T-T)	0 - 40 °C
Windows operating systems supported	Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP Home, Windows XP Professional

Weight and Dimensions

Depth	28 mm
Width	87 mm
Height	14 mm
Weight	19 g