NETGEAR N600 User Manual

Advanced Settings
98
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Disable Wireless Client Association. If your wireless modem router is the repeater,
selecting this check box means that wireless clients cannot associate with it. Only LAN
client associations are allowed.
- If you are
setting up a point-to-point bridge, select this check box.
- If you wan
t all client traffic to go through the other access point (repeater with wireless
client association), leave this check box cleared.
• W
ireless MAC of this router. This field displays the MAC address for your wireless
modem router for your reference. You will need to enter this MAC address in the
corresponding Wireless Repeating Function screen of the other access point you are
using.
• W
ireless Repeater. If your wireless modem router is the repeater, select this radio
button.
Repeater IP Address.
If your wireless modem router is the repeater, enter the IP address
of the other access point.
Base Station MAC Address. If yo
ur wireless modem router is the repeater, enter the
MAC address for the access point that is the base station.
• W
ireless Base Station. If your wireless modem router is the base station, select this
radio button.
Disable Wireless Client Association.
If your wireless modem router is the base station,
selecting this check box means that wireless clients cannot associate with it. Only LAN
client associations are allowed.
Repeater MAC Address (1 through 4). If your wireless modem route
r is the base
station, it can act as the “parent” of up to four other access points. Enter the MAC
addresses of the other access points in these fields.
Set Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You have to know the wireless settings for both units. You have to know the
MAC address of the remote unit. First, set up the base station, and then set up the repeater.
 To set up the base station:
1. Set up bo
th units with exactly the same wireless settings (SSID, mode, channel, and
security). Note that the wireless security option has to be set to None or WEP.

NETGEAR N600 Specifications

General

Wi-Fi	Yes
Modulation	CCK, OFDM
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Security algorithms	40-bit WEP, 64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	600 Mbit/s
Interface	WLAN
USB version	2.0
Connectivity technology	Wireless
Internal	No
Certification	FCC, CE
Component for	PC/Laptop
Product color	Black
Operating temperature (T-T)	0 - 40 °C
Windows operating systems supported	Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP Home, Windows XP Professional

Weight and Dimensions

Depth	28 mm
Width	87 mm
Height	14 mm
Weight	19 g