Genie Basic Settings
33
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
ReadySHARE USB Storage and Printer
You can view information about a USB storage device that is connected to the wireless
modem router’s USB port here.
USB Storage (Basic Settings)
From the Basic Home screen, select ReadySHARE to display the USB Storage (Basic
Settings) screen:
This screen displays the following when Basic is selected:
• Network/Device Name.
The default is \\readyshare. This is the name used to access the
USB device connected to the wireless modem router.
• Available Network Folders. The
folders on the USB device.
Share Name. If only one d
evice is connected, the default share name is USB_Storage.
You can click the name shown, or you can type it in the address field of your web browser.
If Not Shared is shown, the default share has been deleted and no other share for the
root folder exists. Click the link to change this setting.
Read and Write Access. Show the permissions and
access controls on the network
folder: All – no password (the default) allows all users to access the network folder. The
user name (account name) for All – no password is guest. The password for admin is the
same one that you use to log in to the wireless modem router. By default, it is password.
Folder Name. Full p
ath used by the network folder.
Volume Name. Volume
name from the storage device (either USB drive or HDD).
Total and Free Space. Sh
ow the current utilization of the storage device.
• Edit. Click the Edit button to
edit the Available Network Folders settings.