NETGEAR N600

Advanced Settings
113
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Remote Management
The remote management feature lets you upgrade or check the status of your N600 Modem
Router over the Internet.
 To set up remote management:
1. Select Advanced > Adva
nced Setup > Remote Management.
Note: Be sure to change the wireless modem router’s default login password
to a very secure password. The ideal password should contain no dictionary
words from any language and contain uppercase and lowercase letters,
numbers, and symbols. It can be up to 30 characters.
2. Select th
e T
urn Remote Management On check box.
3. Under Allow Remote Access By, specify the external IP ad
dresses to be allowed to access
the wireless modem router’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as p
ractical.
• To allow access from a single IP address on the Internet, select Only Th
is Computer.
Enter the IP address that will be allowed access.
• To allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a
beginning and ending IP address to define the allowed range.
• To allow access from any IP address on the Internet, select Ev
eryone.
4. Specify the port number for accessing the management interface.