Advanced Settings
107
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
2. In the table, select the radio button next to the service name.
3. Click Edit Service or Delete Service.
Application Example: Making a Local Web Server Public
If you host a web server on your local network, you can use port forwarding to allow web
requests from anyone on the Internet to reach your web server.
To make a local web server public:
1. Assign your web server either a fixed IP address or a dynamic IP address using DHCP
a
ddress reservation. In this example, your wireless modem router will always give your
web server an IP address of 192.168.1.33.
2. In the Port Forward
ing/Port Triggering screen, configure the wireless modem router to
forward the HTTP service to the local address of your web server at 192.168.1.33. HTTP
(port 80) is the standard protocol for web servers.
3. (Optional)
Register a host name with a Dynamic DNS service, and configure your wireless
modem router to use the name as described in Dynamic DNS on p
age 109. To access your
web server from the Internet, a remote user has to know the IP address that has been
assig
ned by your ISP. However, if you use a Dynamic DNS service, the remote user can
reach your server by a user-friendly Internet name, such as mynetgear.dyndns.org.
Set Up Port Triggering
Port triggering is a dynamic extension of port forwarding that is useful in these cases:
• Mor
e than one local computer needs port forwarding for the same application (but not
simultaneously).
• An app
lication needs to open incoming ports that are different from the outgoing port.
When port triggering is enabled, the wireless modem rou
ter monitors outbound traffic looking
for a specified outbound “trigger” port. When the wireless modem router detects outbound
traffic on that port, it remembers the IP address of the local computer that sent the data. The
wireless modem router then temporarily opens the specified incoming port or ports, and
forwards incoming traffic on the triggered ports to the triggering computer.
While port forwarding creates a static mapping of a port number or range to a single local
computer
, port triggering can dynamically open ports to any computer that needs them and
can close the ports when they are no longer needed.
Note: If you use applications such as multiplayer gaming, peer-to-peer
connections, real-time communications such as instant messaging,
or remote assistance (a feature in Windows XP), you should also
enable Universal Plug and Play (UPnP) according to the instructions
in Universal Plug and Play on page 114.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
