Genie Basic Settings
35
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the wireless modem router.
To view or change basic wireless settings:
1. On the Basic Home screen, select Wi
reless to display the Wireless Settings screen.
The screen sections, settings, and procedures are explained in the following sections.
2. Make any changes that are needed, and click Appl
y to save your settings.
3. Set up and
test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
• Is your wireless device or computer connected
to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
