EasyManuals Logo

NETGEAR Nighthawk AC1900 D7000v2 User Manual

NETGEAR Nighthawk AC1900 D7000v2
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
To enable Universal Plug-N-Play:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > UPnP.
The UPnP page displays.
5. Select the Turn UPnP On check box.
By default, this check box is selected. UPnP for automatic device configuration can be enabled or
disabled. If the Turn UPnP On check box is cleared, the router does not allow any device to automatically
control router resources, such as port forwarding.
6. Type the advertisement period in minutes.
The advertisement period specifies how often the router broadcasts its UPnP information.This value
can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that
control points receive current device status at the expense of more network traffic. Longer durations
can compromise the freshness of the device status but can significantly reduce network traffic.
7. Type the advertisement time to live in hops.
The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops
are the steps a packet takes between routers.The number of hops can range from 1 to 255.The default
value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you
notice that some devices are not being updated or reached correctly, it might be necessary to increase
this value.
8. Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the router
and which ports (internal and external) that device opened.The UPnP Portmap Table also displays
what type of port is open and whether that port is still active for each IP address.
To refresh the information in the UPnP Portmap Table, click the Refresh button.
Optimize Performance
113
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AC1900 D7000v2 and is the answer not in the manual?

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General IconGeneral
WiFi PerformanceAC1900 (600 + 1300 Mbps)
WiFi RangeLarge homes
Memory128 MB Flash and 256 MB RAM
Frequency Band2.4GHz and 5GHz
Beamforming+Yes
Smart ConnectYes
Guest NetworkYes
VPN SupportYes
Parental ControlsYes
Quality of Service (QoS)Yes
WiFi Technology802.11ac
Number of Ethernet Ports4 x Gigabit Ethernet
Number of USB Ports2 (USB 2.0 and USB 3.0)
ProcessorDual-core 1GHz
Security FeaturesWPA/WPA2
Wireless Standard802.11 a/b/g/n/ac
Ports4 Gigabit Ethernet, 2 USB
Modem TypeVDSL/ADSL

Related product manuals