NETGEAR ProSAFE GS108Ev3 User Manual

3
Contents
Chapter 1 Get Started
Supported Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Configure the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Access the Switch Using a Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Access a Switch That Is Off-Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Access a Switch That Is Connected to a Network . . . . . . . . . . . . . . . . . . . . . . . 8
Access the Switch With the ProSAFE Plus Configuration Utility . . . . . . . . . . . . . 9
Install the ProSAFE Plus Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Access and Configure the Switch Using the ProSAFE Plus Utility . . . . . . . . . . 9
Change the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Use Browser-Based Access to Change the Password . . . . . . . . . . . . . . . . . . . 11
Use the ProSAFE Plus Utility to Change the Password . . . . . . . . . . . . . . . . . . 11
Chapter 2 Manage Network Settings
Specify IP Address Settings for the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Use Browser-Based Access to Specify the Switch IP Address. . . . . . . . . . . . 14
Use the ProSAFE Plus Utility to Specify the Switch IP Address . . . . . . . . . . . 15
Manage Multicast Traffic With IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Use Browser-Based Access to Customize IGMP Snooping. . . . . . . . . . . . . . . 16
Use the ProSAFE Plus Utility to Customize IGMP Snooping . . . . . . . . . . . . . . 17
Use Browser-Based Access to Specify a VLAN for IGMP Snooping . . . . . . . 19
Use the ProSAFE Plus Utility to Specify a VLAN for IGMP Snooping . . . . . . 20
Set Up Static Link Aggregation Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Use Browser-Based Access to Specify LAG Membership and
Enable LAGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Use the ProSAFE Plus Utility Specify LAG Membership and
Enable LAGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter 3 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . 26
Use Browser-Based Access to Enable 802.1p/DSCP-Based QoS . . . . . . . . 26
Use the ProSAFE Plus Utility to Enable 802.1p/DSCP-Based QoS. . . . . . . . 27
Configure Port-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Use Browser-Based Access to Configure Port-Based QoS . . . . . . . . . . . . . . 28
Use the ProSAFE Plus Utility to Configure Port-Based QoS. . . . . . . . . . . . . . 29
Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Use Browser-Based Access to Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . 31
Use the ProSAFE Plus Utility to Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . 32
Set Up Broadcast Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

NETGEAR ProSAFE GS108Ev3 Specifications

General

Model	GS108Ev3
Category	Switch
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
MAC Address Table Size	4K
Jumbo Frame Support	9, 216 bytes
VLAN Support	Yes
QoS	Yes
Power over Ethernet (PoE)	No
Fanless Design	Yes
Power Supply	External power adapter
Ports	8 Gigabit Ethernet ports
Management	Web-based management
Energy Efficient Ethernet (EEE)	Yes
Operating Temperature	0° to 40°C (32° to 104°F)
Storage Temperature	-20° to 70°C (-4° to 158°F)
Humidity	90% maximum relative humidity, noncondensing
Dimensions	6.22 x 4.02 x 1.10 in (158 x 102 x 28 mm)