EasyManuals Logo

NETGEAR ProSAFE GS108Ev3 User Manual

NETGEAR ProSAFE GS108Ev3
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
Diagnostics and Troubleshooting
81
ProSAFE Gigabit Web Managed (Plus) Switches
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select System > Monitoring > Cable Tester.
The previous figure is an example. Your switch might provide more or less ports.
7. Select one or more check boxes.
8. Click the TEST SELECTED PORT button.
The switch tests the cable connection for the selected ports and displays the results. This
process might take up to a few minutes.
Resolve a Subnet Conflict to Access the Switch
If you power on the switch before you connect it to a network that includes a DHCP server,
the switch uses its own default IP address of 192.168.0.239. This subnet might be different
from the subnet used in your network. You might see the following message if you try to use
the ProSAFE Plus Utility to access the switch:
The switch and manager IP address are not in the same subnet.
To fix this subnet conflict:
1. Disconnect the Ethernet cable between the switch and your network.
2. Unplug the switch’s power cord.
3. Reconnect the Ethernet cable between the switch and your network.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSAFE GS108Ev3 and is the answer not in the manual?

NETGEAR ProSAFE GS108Ev3 Specifications

General IconGeneral
ModelGS108Ev3
CategorySwitch
Switching Capacity16 Gbps
Forwarding Rate11.9 Mpps
MAC Address Table Size4K
Jumbo Frame Support9, 216 bytes
VLAN SupportYes
QoSYes
Power over Ethernet (PoE)No
Fanless DesignYes
Power SupplyExternal power adapter
Ports8 Gigabit Ethernet ports
ManagementWeb-based management
Energy Efficient Ethernet (EEE)Yes
Operating Temperature0° to 40°C (32° to 104°F)
Storage Temperature-20° to 70°C (-4° to 158°F)
Humidity90% maximum relative humidity, noncondensing
Dimensions6.22 x 4.02 x 1.10 in (158 x 102 x 28 mm)

Related product manuals