EasyManuals Logo

NETGEAR ProSAFE GS108Ev3 User Manual

NETGEAR ProSAFE GS108Ev3
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
Manage and Monitor the Switch
58
ProSAFE Gigabit Web Managed (Plus) Switches
Manage the Port Speed
By default, the port speed on all ports is set automatically after the switch determines the
speed using auto-negotiation with the link partner. You can select a specific port speed
setting for each port, or disable a port by shutting it down manually.
Use Browser-Based Access to Specify the Port Speed or Shut
Down a Port
To specify the port speed or shut down ports:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 7.
The login window opens.
4. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5. Select System > Management > Port Status.
The previous figure is an example. Your switch might provide more or less ports.
6. Select one or more ports.
7. In the Speed menu, select one of the following options:
Auto. The port speed is set automatically after the switch determines the speed using
auto-negotiation with the link partner. This is the default setting.
Disable. The port is shut down.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSAFE GS108Ev3 and is the answer not in the manual?

NETGEAR ProSAFE GS108Ev3 Specifications

General IconGeneral
ModelGS108Ev3
CategorySwitch
Switching Capacity16 Gbps
Forwarding Rate11.9 Mpps
MAC Address Table Size4K
Jumbo Frame Support9, 216 bytes
VLAN SupportYes
QoSYes
Power over Ethernet (PoE)No
Fanless DesignYes
Power SupplyExternal power adapter
Ports8 Gigabit Ethernet ports
ManagementWeb-based management
Energy Efficient Ethernet (EEE)Yes
Operating Temperature0° to 40°C (32° to 104°F)
Storage Temperature-20° to 70°C (-4° to 158°F)
Humidity90% maximum relative humidity, noncondensing
Dimensions6.22 x 4.02 x 1.10 in (158 x 102 x 28 mm)

Related product manuals