EasyManuals Logo

NETGEAR ProSAFE GS108Ev3 User Manual

NETGEAR ProSAFE GS108Ev3
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Diagnostics and Troubleshooting
79
ProSAFE Gigabit Web Managed (Plus) Switches
Use Browser-Based Access to Register Your Product
Registering your product allows you to receive email alerts and streamlines the technical
support process.
To register your product:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection.
Note: You must access the switch while connected to the network
(on-network) to register the switch.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 7.
The login window opens.
4. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5. Select Help > Registration.
The Product Registration page displays.
6. Click the Register button.
7. Follow the onscreen process to register your product.
Test Cable Connections
You can use the cable diagnostic feature to easily find out the health status of network
cables. If any problems exist, this feature helps quickly locate the point where the cabling
fails, allowing connectivity issues to be fixed much faster, potentially saving technicians hours
of troubleshooting.
If an error is detected, the distance at which the fault is detected is stated in meters. (This is
the distance from the port.)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSAFE GS108Ev3 and is the answer not in the manual?

NETGEAR ProSAFE GS108Ev3 Specifications

General IconGeneral
ModelGS108Ev3
CategorySwitch
Switching Capacity16 Gbps
Forwarding Rate11.9 Mpps
MAC Address Table Size4K
Jumbo Frame Support9, 216 bytes
VLAN SupportYes
QoSYes
Power over Ethernet (PoE)No
Fanless DesignYes
Power SupplyExternal power adapter
Ports8 Gigabit Ethernet ports
ManagementWeb-based management
Energy Efficient Ethernet (EEE)Yes
Operating Temperature0° to 40°C (32° to 104°F)
Storage Temperature-20° to 70°C (-4° to 158°F)
Humidity90% maximum relative humidity, noncondensing
Dimensions6.22 x 4.02 x 1.10 in (158 x 102 x 28 mm)

Related product manuals