NETGEAR ProSAFE GS108Ev3 User Manual

5
ProSAFE Gigabit Web Managed (Plus) Switches
Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Use Browser-Based Access to Upgrade the Firmware . . . . . . . . . . . . . . . . . . 64
Use the ProSAFE Plus Utility to Upgrade the Firmware. . . . . . . . . . . . . . . . . . 65
Reboot the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Use Browser-Based Access to Reboot the Switch . . . . . . . . . . . . . . . . . . . . . . 66
Use the ProSAFE Plus Utility to Reboot the Switch . . . . . . . . . . . . . . . . . . . . . 67
Save the Switch Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Use Browser-Based Access to Save the Switch Configuration . . . . . . . . . . . 68
Use the ProSAFE Plus Utility to Save the Switch Configuration. . . . . . . . . . . 68
Restore a Saved Switch Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Use Browser-Based Access to Restore a Saved Switch Configuration . . . . . 69
Use the ProSAFE Plus Utility to Restore a Saved Switch Configuration . . . . 70
Restore Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Use Browser-Based Access to Restore Factory Settings . . . . . . . . . . . . . . . . 70
Use the ProSAFE Plus Utility to Restore Factory Settings. . . . . . . . . . . . . . . . 71
Enable Port Mirroring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Use Browser-Based Access to Enable Port Mirroring . . . . . . . . . . . . . . . . . . . 72
Use the ProSAFE Plus Utility to Enable Port Mirroring . . . . . . . . . . . . . . . . . . 73
View Switch Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Use Browser-Based Access to View Switch Information . . . . . . . . . . . . . . . . 74
Use the ProSAFE Plus Utility to View Switch Information. . . . . . . . . . . . . . . . 75
View the Port Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Use Browser-Based Access to View and Clear the Port Statistics. . . . . . . . . 76
Use the ProSAFE Plus Utility to View and Clear the Port Statistics . . . . . . . . 77
Chapter 6 Diagnostics and Troubleshooting
Use Browser-Based Access to Register Your Product . . . . . . . . . . . . . . . . . . . . . 79
Test Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Use Browser-Based Access to Test a Cable Connection . . . . . . . . . . . . . . . . . 80
Use the ProSAFE Plus Utility to Test a Cable Connection . . . . . . . . . . . . . . . . 80
Resolve a Subnet Conflict to Access the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Appendix A Factory Default Settings

NETGEAR ProSAFE GS108Ev3 Specifications

General

Model	GS108Ev3
Category	Switch
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
MAC Address Table Size	4K
Jumbo Frame Support	9, 216 bytes
VLAN Support	Yes
QoS	Yes
Power over Ethernet (PoE)	No
Fanless Design	Yes
Power Supply	External power adapter
Ports	8 Gigabit Ethernet ports
Management	Web-based management
Energy Efficient Ethernet (EEE)	Yes
Operating Temperature	0° to 40°C (32° to 104°F)
Storage Temperature	-20° to 70°C (-4° to 158°F)
Humidity	90% maximum relative humidity, noncondensing
Dimensions	6.22 x 4.02 x 1.10 in (158 x 102 x 28 mm)