NETGEAR ProSafe GSM7224

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
A-2 IS CLI Mapping
202-10009-01_060204
Privileged
EXEC
no ip http server
Switching config network javamode <enable |
disable>
Privileged
EXEC
network javamode
Privileged
EXEC
no network javamode
Switching config prompt <system prompt> Privileged
EXEC
set prompt <promptstring>
Switching config serial baudrate <speed> Line
Config
serial baudrate {1200 | 2400 | 4800 |
9600 | 19200 | 38400 | 57600 |
115200}
Switching config serial timeout <0 - 160> Line
Config
serial timeout <0-160>
Switching config snmpcommunity
accessmode <ro | rw> <name>
Global
Config
snmp-server community ro <name>
Global
Config
snmp-server community rw <name>
Switching config snmpcommunity create
<name>
Global
Config
snmp-server community <name>
Switching config snmpcommunity delete
<name>
Global
Config
no snmp-server community <name>
Switching config snmpcommunity ipaddr
<ipaddr> <name>
Global
Config
snmp-server community ipaddr
<ipaddr> <name>
Global
Config
no snmp-server community ipaddr
<name>
Switching config snmpcommunity ipmask
<ipmask> <name>
Global
Config
snmp-server community ipmask
<ipmask> <name>
Global
Config
no snmp-server community ipmask
<name>
Switching config snmpcommunity mode
<enable | disable> <name>
Global
Config
snmp-server community mode
<name>
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
CLI Command
Mode Syntax