NETGEAR ProSafe GSM7224 - Page 183

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
IS CLI Mapping A-7
202-10009-01_060204
Switching config spanningtree bridge priority
<0-61440>
Removed
Switching config spanningtree cst port
pathcost <slot/port>
<1-200000000/auto>
Interface
Config
spanning-tree mst 0 cost
{<1-200000000> | auto}
Interface
Config
no spanning-tree mst 0 cost
Switching config spanningtree cst port priority
<slot/port> <0-240>
Interface
Config
spanning-tree mst 0 port-priority
<0-240>
Interface
Config
no spanning-tree mst 0 port-priority
Switching config spanningtree cst port
edgeport <slot/port> <true/false>
Interface
Config
spanning-tree edgeport
Interface
Config
no spanning-tree edgeport
Switching config spanningtree mst create
<mstid>
Global
Config
spanning-tree mst instance <mstid>
Switching config spanningtree mst delete
<mstid>
Global
Config
no spanning-tree mst instance
<mstid>
Switching config spanningtree mst vlan add
<mstid> <vlan>
Global
Config
spanning-tree mst vlan <mstid>
<vlanid>
Switching config spanningtree mst vlan
remove <mstid> <vlan>
Global
Config
no spanning-tree mst vlan <mstid>
<vlanid>
Switching config spanningtree mst priority
<mstid> <0-61440>
Global
Config
spanning-tree mst priority <mstid>
<0-61440>
Global
Config
no spanning-tree mst priority <mstid>
Switching config spanningtree mst port
pathcost <mstid> <slot/port>
<1-200000000/auto>
Interface
Config
spanning-tree mst <mstid> cost
{<1-200000000> | auto}
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
CLI Command
Mode Syntax