NETGEAR ProSafe GSM7224 - Page 184

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
A-8 IS CLI Mapping
202-10009-01_060204
Interface
Config
no spanning-tree mst <mstid> cost
Switching config spanningtree mst port
priority <mstid> <slot/port>
<0-240>
Interface
Config
spanning-tree mst <mstid>
port-priority <0-240>
Interface
Config
no spanning-tree mst <mstid>
port-priority
Switching show inventory Privileged
EXEC
show hardware
Switching show sysinfo Privileged
EXEC
show sysinfo
Switching show arp switch Privileged
EXEC
show arp switch
Switching show forwardingdb table [macaddr/
all]
Privileged
EXEC
show mac-addr-table [{<macaddr> |
all}]
Switching show stats port detailed <slot/port> Privileged
EXEC
show interface ethernet {<slot/port> |
switchport}
Switching show stats switch detailed Privileged
EXEC
Switching show stats port summary <slot/
port>
Privileged
EXEC
show interface {<slot/port> |
switchport}
Switching show stats switch summary Privileged
EXEC
Switching show eventlog Privileged
EXEC
show eventlog
Switching show msglog Privileged
EXEC
show msglog
Switching show traplog Privileged
EXEC
show logging
Switching config sysname <name> Global
Config
snmp-server sysname <name>
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
CLI Command
Mode Syntax