NETGEAR ProSafe GSM7224 - Page 185

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
IS CLI Mapping A-9
202-10009-01_060204
Switching config syslocation <location> Global
Config
snmp-server location <loc>
Switching config syscontact <contact> Global
Config
snmp-server contact <con>
Switching ping <ipaddr> Privileged
EXEC and
User
EXEC
ping <ipaddress>
Switching reset system Privileged
EXEC
reload
Switching transfer upload mode <xmodem |
tftp>
Privileged
EXEC
copy { { nvram:errorlog |
nvram:msglog | nvram:startup-config
| nvram:traplog } <url> } | {<url>
nvram:startup-config | system:image |
nvram:sshkey-rsa1 |
nvram:sshkey-rsa2 |
nvram:sshkey-dsa |
nvram:sslpem-root |
nvram:sslpem-server |
nvram:sslpem-dhweak |
nvram:sslpem-strong } |
{system:running-config
nvram:startup-config}
Switching transfer upload serverip <ipaddr>
Switching transfer upload path <path>
Switching transfer upload filename <name>
Switching transfer upload datatype <config |
errorlog | msglog | traplog>
Switching transfer upload start
Switching transfer download mode <xmodem
| tftp>
Switching transfer download serverip
<ipaddr>
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
CLI Command
Mode Syntax