NETGEAR ProSAFE M4300 series User Manual

1
Introduction
The NETGEAR
®
ProSAFE
®
Managed Stackable Switch Series M4300 are high-performance, IEEE-compliant,
stackable, access and aggregation layer switches.
This hardware installation guide complements the installation guide that came with your switch.
This chapter serves as an introduction to the ProSAFE Managed Stackable Switch Series M4300 and includes
the following sections:
• Hardware Overview
• Hardware Features
• About Stacking
• Safety Instructions and Warnings
For more information about the topics that are covered in this manual, visit the support website
at support.netgear.com.
Note
For technical specifications, see the data sheet at
netgear.com/business/products/switches/managed. For switch documentation, see the
resource CD in the product package or visit downloadcenter.netgear.com. In this manual,
the ProSAFE Managed Stackable Switch Series M4300 is referred to as the switch.
Note
4
Managed Stackable Switch Series M4300

NETGEAR ProSAFE M4300 series Specifications

General

Stackable	Yes
Series	ProSAFE M4300
Layer	L3
Ports	Varies by model (24, 48 ports)
PoE	Available on some models (PoE+)
Management	Web, CLI, SNMP
Redundancy	Yes (dual power supplies on select models)
Form Factor	Rack-mountable
Throughput	Varies by model
Switching Capacity	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	95% relative humidity, non-condensing
Power Supply	Varies by model
Warranty	Lifetime