Manage Device Security
250
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > Access Control > Access Rule Configuration.
The Access Rule Configuration page displays.
6. Select the check box for the access rule.
The settings display in the fields in the table heading.
7. Change the settings as needed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Remove an Access Rule
You can remove an access rule only when the associated access profile is in a deactivated
state (see Activate or Deactivate an Access Control Profile and View the Profile Summary on
page 251).
To remove one or more access rules for an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > Access Control > Access Rule Configuration.
The Access Rule Configuration page displays.
6. Select the check boxes for the access rules.
7. Click the Delete button.
The access rules are removed from the access control profile.
To Next Page
Loading...
Need help?
General
