NETGEAR ProSafe XS728T User Manual

Hardware Specifications and Default Settings
373
ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728T and XS748T
Filter multicast control 1 Disabled
Number of static routes 64 for IPv4 and IPv6, respectively N/A
Number of routed VLANs 32 for IPv4 and IPv6, respectively N/A
Number of ARP cache entries 1024 N/A
Number of DHCP snooping
bindings
1024 N/A
Number of DHCP static entries 1024 N/A
MLD snooping v1/v2 All VLANs Disabled
MLD Snooping Querier All VLANs Disabled
Private VLAN Primary, Community and Isolated Disabled
GVRP All ports Disabled
Protocol and MAC based VLAN 1 Disabled
OUI based Voice VLAN All ports Disabled
Auto-VoIP All ports Disabled
IP MTU settings Up to 9000. Globally Per IPv4 and
IPv6
1500
USB port & USB flash device 1 NA
Table 73. Switch features and default settings (continued)
Feature Sets Supported Default Setting

NETGEAR ProSafe XS728T Specifications

General

Model	XS728T
Category	Switch
Switching Capacity	560 Gbps
Forwarding Rate	417 Mpps
Ports	24 x 10G SFP+, 4 x 10G Base-T
Management	Web-based, SNMP
Features	ACLs, QoS
Power Supply	Internal 100-240VAC, 50-60Hz
Operating Temperature	0°C to 50°C (32°F to 122°F)
Operating Humidity	90% maximum relative humidity, non-condensing
MAC Address Table Size	32, 000 entries