NETGEAR ProSafe XS728T User Manual

Configure System Information
71
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > LLDP > Advanced > LLDP-MED Network Policy.
The LLDP-MED Network Policy page displays.
6. From the Interface menu, select the interface for which you want to view the information.
Note: The menu includes only the interfaces on which LLDP is enabled. If no
interfaces are enabled for LLDP, the Interface menu does not display.
The page refreshes and displays the data transmitted in the network policy TLVs for the
interface.
The following table describes the LLDP-MED network policy information that displays on the
page.
Table 16. LLDP-MED network policy information
Field Description
Network Policy Number The policy number.
Application The media application type that is associated with the policy. Only the voice
application type is supported. The application type that is received on the
interface includes the VLAN ID, priority, DSCP, tagged bit status, and
unknown bit status. The application information is displayed only if a network
policy TLV was transmitted from the port.
VLAN ID The VLAN ID associated with the policy.
VLAN Type Indicates whether the VLAN associated with the policy is tagged or
untagged.
User Priority The priority associated with the policy.
DSCP The DSCP associated with a particular policy type.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English