23. BAM Interface Specification
The following sections detail the BAM interface on the NW6000 in compliance with IEC
62923:2018.
23.1 Bridge Alert Management (BAM)
BAM reporting is available as follows:
BAM configuration is provided here in BAM Settings.
23.2 Manufacturer ID
The Manufacturer ID for alert messages coming from the NW6000 is …
Manufacturer ID = NWS
23.3 Supported NMEA Messages
The NW6000 supports the following messages…
f) ALF
g) ALC
h) ACN
The heartbeat message, HBT, is sent by the NW6000 at intervals of 30s.
To Next Page
Loading...