9.6 Errors
If errors occur these will be indicated on the display of the Bridge Control Unit.
9.7 Configuration
NW6031 Audio Hub IP-addresses must be set during commissioning time. Please refer to VDR
Configuration functions.
All inputs default to NW6031 Analogue Microphone input by default after probing for the first time.
These can be changed via the configurator for VHF inputs if required.
9.8 Operating instructions
After commissioning of the VDR system, the NW6031 Audio Hub does not require (crew) operating
instructions.
Operational input testing (Microphone or VHF functions) tests may be performed manually from
the Bridge Control Unit.
To Next Page
Loading...
