Customize Entries in the VidChanX.ini Files
Each entry in the <VidChanX.ini> file indicates the voltage level, timing, and signal characteristics
of the video source. The values generated by Video Configuration Utility (VCS2) are based on
VESA and Industry Standards and are adequate to capture initial images.
If a video capture does not initiate, the most likely reason is that the VPOL1 field may be set wrong.
The Video Configuration Utility (VCS2), if provided with a channel number, will capture and save
a sample image to verify the proper state of the VPOL1 field. The image will be saved to the
filename <TestImage.bmp>. The image will be annotated with a calibration grid to verify proper
video alignment.
In certain rare cases it may be necessary to optimize the video to correct the color balance.
To Next Page
Loading...
