Nexx X-COM2 - Volume Adjustment; Software

12
X-COM2
Note:
If the Voice Command setting is disabled, press and hold the Center Button
and the (+) Button for more than 3 seconds as the Bluetooth system powers
on.
4.6 Volume Adjustment
You can raise or lower the volume by tapping the (+) Button or the (-)
Button. The volume is set and maintained independently at different
levels for each audio source even when you turn off and on the
headset. For example, once you set the volume for mobile phone
handsfree, it will not change even if you adjust the volume for your
Bluetooth MP3 music. So you can always maintain the preferred
optimum volume level for each audio source.
WARNING
Use of the product at a high volume for a long period of time may
damage your eardrums or hearing ability. Keep the volume at a modest
level to prevent damage.
4.7 Software
4.7.1 Device Manager
TheDeviceManagerallowsyoutoupgradethermwareandcongure
the device settings directly from your PC. Using this software, you can
assign speed dial presets, FM radio frequency presets and more. It is
available to download for both Windows and Mac. For more information
on downloading the Device Manager, please visit oem.sena.com/nexx/.
4.7.2 Smartphone App
The Smartphone App allows you to congure the device settings,
create groups of intercom friends, and view the quick start guide.
Simply pair your phone with your X-COM2 headset, run the Smartphone
Appandyoucancongureitssettingsdirectlyfromyoursmartphone.
You can download the Smartphone App for Android or iPhone from
www.sena.com.