Nexx X-COM2 - Second Mobile Phone Pairing; Bluetooth Stereo Device Pairing

14
X-COM2
5.2 Second Mobile Phone Pairing
Typical Bluetooth headsets can connect with only one Bluetooth
device, but a second mobile phone pairing allows the headset to
connect with another Bluetooth device such as a second mobile
phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter.
1. To pair the second mobile phone, press the Center Button for 12
seconds until you hear high-toned double beeps. You will hear a
voice prompt saying “Conguration menu”.
2. Within 2 seconds, double tap the (+) Button, then the LED turns to
blueashingandthebeepsturntohigh-toneddoublebeeps.You
will hear a voice prompt saying “Second mobile phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
X-COM2 in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5. Themobilephone conrmsthatpairinghascompletedandthe
X-COM2 is ready to use. You will hear a voice prompt from the
X-COM2 saying “Your headset is paired”.
Note:
If you have two audio (A2DP) devices connected to your headset then the
audio from one device will interrupt the audio from the other device. For
example, if you are playing music from the primary mobile phone, then it
can be interrupted by playing music from the secondary mobile phone and
vice versa.
5.3 Bluetooth Stereo Device Pairing
1. If a Bluetooth stereo device is integrated with the mobile phone
such as smartphones, you don’t need to pair the X-COM2 with it
separately. When the X-COM2 is paired with the mobile phone, it
is also paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device, follow the
pairing procedure separately. The procedure is the same as the
procedure in
section 5.1, “Mobile Phone Pairing” .
Note:
1. If Bluetooth connection between the headset and a mobile phone is
disconnected, press the Center Button for 3 seconds to recover the
Bluetooth connection immediately.
2. If Bluetooth connection between the headset and a media player is
disconnected, press the Center Button for 1 second to recover the
Bluetooth connection and play.