Nexx X-COM2 - Universal Intercom; Universal Intercom Pairing; Two-way Universal Intercom

35
English
X-COM2
17 UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non-Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they
supporttheBluetoothHands-FreeProle(HFP).Theworkingdistance
may differ depending on the performance of Bluetooth headset that it
is connected to. In general, it is shorter than normal intercom distance
sinceitusestheBluetoothhandsfreeprole.
17.1 Universal Intercom Pairing
The X-COM2 can be paired with non-Sena Bluetooth headsets for
Bluetooth intercom conversation. You can pair the X-COM2 with only
one non-Sena Bluetooth headset so if you pair with a different non-
Sena Bluetooth headset, the previous pairing list will be removed.
1. Turn on the X-COM2 and a non-Sena Bluetooth headset that you
want to pair with.
2. PresstheCenterButtonfor12secondstoentertheconguration
menu. Tap the (-) Button three times and you will hear a voice
prompt saying “Universal intercom pairing”. Press the Center
Button to enter into Universal Intercom Pairing mode and the blue
LED will ash rapidly and you will hear multiple beeps. Please
refer to
section 23.8, “Universal Intercom Pairing” for more details.
3. Perform the operation required for handsfree pairing on the non-
Sena Bluetooth headset (refer to the user’s manual of the headsets
you want to use). The X-COM2 will automatically perform pairing
with non-Sena Bluetooth headsets in pairing mode.
17.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. Make sure that you may
single tap the Center Button to begin an intercom conversation with
therstintercomfriend,doubletapwiththesecondintercomfriend,
and triple tap with the third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection by activating the voice dialing or using the redialing
operation. You may also disconnect the existing connection by ending
a call operation function (refer to the user’s manual of the headsets for
voice dialing, redialing, and ending a call).