20
X-COM2
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item.
3. Tap the Center Button to select a voice menu among the followings:
(1) Last number redial (4) Speed dial 3
(2) Speed dial 1 (5) Cancel
(3) Speed dial 2
4. To redial the last number called, tap the Center Button when you
hear a voice prompt saying “Last number redial”.
5. To call one of the speed dials, tap the Center Button when you
hear the voice prompt, “Speed Dial (#)”.
6. If you want to exit the speed dial immediately, tap the (+) Button
or the (-) Button until you hear a voice prompt saying “Cancel”,
and tap the Center Button. If any button is not pressed within 15
seconds, the X-COM2 will exit the voice speed dial menu and go
back to stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset in order
to use the speed dial function.
2. Speed dial needs to be setup through the Smartphone App or the Device
Manager first.
Answer Tap the Center Button or Say “Hello”
End Press the Center Button for 2 seconds
Reject Press the Center Button for 2 seconds
Call Use phone keypad
Speed Dial Press the (+) Button for 3 seconds
Voice Dial Press the Center Button for 3 seconds
Mobile Phone Call Button Operations
7.3 VOX Phone (Default: Enable)
You can enable or disable VOX Phone through the Device Manager or
the Smartphone App. If this feature is enabled, you can answer
incoming calls by simply saying a word loudly enough, unless you are
connected to intercom. For example, when you hear a series of beeps
for an incoming call, you can answer the phone by saying “Hello” or
any other word loudly. However, the VOX Phone feature does not work
if you are connected to intercom. If this mode is disabled, you have to
tap the Center Button to answer an incoming call.
To Next Page
Loading...
