18
X-COM2
6 PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
If you have an MP3 stereo music phone such as a smartphone,
sometimes you may need to selectively use the X-COM2 for A2DP
stereo music only or for mobile phone handsfree only. These
instructions are for advanced users who want to pair the X-COM2 to
their smartphones only with one selective prole: A2DP for stereo
music or HFP for phone calls.
If you have previously paired a mobile phone to the X-COM2, you must
clear the previous paring list on both devices; the mobile phone and
X-COM2. To clear the pairing list on X-COM2, please do a factory reset
or follow the pairing list clearing procedure described in this manual.
To clear the pairing list on the mobile phone, please refer to the mobile
phone manual. For most smartphones, delete the X-COM2 from the list
of Bluetooth devices in the settings menu.
6.1 A2DP Stereo Music Only
1. Turn on the headset and press the Center Button for 12 seconds
until you hear high-toned double beeps. You will hear a voice
prompt saying “Conguration menu”.
2. Within 2 seconds, tap the (+) Button 5 times, then the LED turns
to redashing and the beeps turn to doublemid-toned beeps.
You will hear a voice prompt saying “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
X-COM2 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
6.2 HFP for Phone Call Only
1. Turn on the headset and press the Center Button for 12 seconds
until you hear high-toned double beeps. You will hear a voice
prompt saying “Conguration menu”.
2. Within 2 seconds, tap the (+) Button 4 times, then the LED turns
toblueashingandthebeepsturntomultiplemid-tonedbeeps.
You will hear a voice prompt saying “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
X-COM2 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
To Next Page
Loading...