Nexx X-COM2 - Pairing with Other Sena Headset Models for Intercom Conversation; Two-Way & Multi-Way Intercom; Two-way Intercom

29
English
X-COM2
5. The intercom pairing queue is ‘Last-Come, First-Served’. If a
headset has multiple paired headsets for intercom conversations,
the last paired headset is set as rst intercom friend. The
previous intercom friend becomes second intercom friend, and
third intercom friend.
Note:
1. For example, after the pairing procedures listed above, headset D is the
rst intercom friend of headset A. Headset C is the second intercom
friend of headset A, and headset B is the third intercom friend of
headset A.
2. If you want to cancel pairing, double tap the Center Button during pairing
mode.
13.2 Pairing with Other Sena Headset Models for
Intercom Conversation
The X-COM2 can be paired with all other Sena headset models such
as the SMH10 and the SMH5 for an intercom conversation. Please
follow the same procedure as above to pair with these headset models.
Note:
The SMH5 cannot participate in multi--way intercom with the X-COM2 or the
SMH10. The SMH5 has limited capability of having two-way intercom with
other SMH5s or with other Sena headsets, such as the SMH10.
14 TWO-WAY & MULTI-WAY INTERCOM
14.1 Two-way Intercom
1. You can start an intercom conversation with one of any intercom
friends by using either the Center Button or the voice command.
Single tap to start intercom with the rst intercom friend and
double tap to start intercom with the second intercom friend. To
start intercom with the third intercom friend and above, triple tap
to enter into friend selection mode. Tap the (+) Button or the (-)
Button to select a friend and tap the Center Button once more to
initiate the intercom with that friend.
2. You can end an intercom conversation by using either the Center
Button or the voice commands. Press the Center Button for 1
second to end any intercom, or use the voice command, “End
intercom”. Or, you can single tap to end intercom with the rst
intercom friend and double tap to end intercom with the second
intercom friend. To end intercom with the third intercom friend
and above, triple tap to enter into friend selection mode. Tap the
(+) Button or the (-) Button to select a friend and tap once more
to end intercom with that friend. Also, use the voice command,
“Intercom [four ~ nine]” to end each intercom.