Nexx X-COM2 - Mobile Phone Call Making and Answering; Speed Dialing

19
English
X-COM2
7 MOBILE PHONE CALL MAKING AND
ANSWERING
7.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Center Button to
answer the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if Voice Activated Phone Answering (VOX
Phone) is enabled, unless you are connected to intercom.
3. To end a call, press the Center Button for 2 seconds, or wait for
the called person to end the call.
4. To reject a call, press the Center Button for 2 seconds until you
hear a voice prompt saying “Call Rejected”.
5. There are several ways to make a phone call:
•Enter numbers on your mobile phone’s keypad and make a call.
Then the call is automatically transferred to the headset.
•In stand-by mode, press the Center Button for 3 seconds, to
activate the voice dialer of your mobile phone. For this, the voice
dialing function must be available on the mobile phone. Refer to
your mobile phone manual for further instruction.
Note:
1. If you are using second mobile phone connection and you have an
incoming call from the second phone during the call of the first phone,
then you may still receive the call from second phone. In this case, the
call from the first phone is on waiting mode. If you end a call, then it will
automatically guide you to the first phone call.
2. If you are using second mobile phone connection of mobile phone and
GPS, you may not be able to listen to the GPS voice instruction during the
phone call.
7.2 Speed Dialing
7.2.1 Assigning Speed Dial Presets
You can assign phone numbers for speed dialing through the Device
Manager or the Smartphone App.
7.2.2 Using Speed Dial Presets
You can quickly make a phone call by using the voice speed dial
menu.
1. To enter into the voice speed dial menu, press the (+) Button for
3 seconds and you will hear a mid-toned single beep and a voice
prompt saying “Speed dial”.