Nexx X-COM2 - Phone Pairing; Second Mobile Phone Pairing; GPS Pairing; Phone Selective Pairing

43
English
X-COM2
23.1 Phone Pairing
Voice Prompt
"Phone pairing"
Factory Default N/A
To go into mobile phone pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone pairing”. Please refer
to
section 5.1, “Mobile Phone Pairing” for details on mobile phone
pairing. If you tap the (+) Button or the (-) Button, you can exit from the
phone pairing mode.
23.2 Second Mobile Phone Pairing
Voice Prompt
“Second mobile
phone pairing”
Factory Default N/A
To go into second mobile phone pairing mode, tap the (+) Button or
the (-) Button until you hear the voice prompt, “Second mobile phone
pairing”. Please refer to section 5.2, “Second Mobile Phone Pairing”
for details on second mobile phone pairing. If you tap the (+) Button or
the (-) Button, you can exit from the second mobile phone pairing
mode.
23.3 GPS Pairing
Voice Prompt
“GPS pairing”
Factory Default N/A
To go into GPS pairing mode, tap the (+) Button or the (-) Button until
you hear the voice prompt, “GPS pairing”. Please refer to
section
5.4.1, “GPS Pairing”
for details on GPS pairing. If you tap the (+)
Button or the (-) Button, you can exit from the GPS pairing mode.
23.4 Phone Selective Pairing
Voice Prompt
“Phone selective pairing”
Factory Default N/A
To go into phone selective pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone selective pairing”.
Please refer to section 6.2, “HFP for Phone Call Only” for details on
phone selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the phone selective pairing mode.