Nexx X-COM2 - Factory Reset; Exit Voice Configuration Menu

45
English
X-COM2
23.9 Factory Reset
Voice Prompt
“Factory reset”
Factory Default N/A
Execute Tap the Center Button
To restore factory default settings on the X-COM2, tap the (+) Button
or the (-) Button until you hear a voice prompt, “Factory reset”, and
taptheCenterButtontoconrm.TheX-COM2powersoffwithavoice
prompt, “Headset reset, good-bye”.
23.10 Exit Voice Conguration Menu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Tap the Center Button
Toexitvoicecongurationmenuandgetbacktostand-bymode,tap
the (+) Button or the (-) Button until you hear a voice prompt, “Exit
conguration”,andtaptheCenterButtontoconrm.
Tap the (+) Button or the (-) Button Tap the Center Button
Phone Pairing None
Second Mobile Phone Pairing
None
GPS Pairing None
Phone Selective Pairing None
Media Selective Pairing
None
Delete All Pairings
Execute
Remote Control Pairing Execute
Universal Intercom Pairing Execute
Factory Reset
Execute
Exit Conguration
Execute