Nexx X-COM2 - Page 17

17
English
X-COM2
4. When the pairing is completed, you will hear a voice prompt
saying “Your headset is paired”.
5. If the pairing process is not completed within three minutes, the
X-COM2 will return to stand-by mode.
The incoming audio from the two-way radio via SR10 is heard in the
background while having an intercom conversation or a mobile phone
call. You can listen to music, answer a mobile call, have an intercom
conversation and use a two-way radio via the SR10 for group
communicationasshowninthegurebelow.AGPSnavigationora
radar detector which has a headphone jack or audio line-out could be
connected to the SR10 by a wire. The GPS voice instruction or the
radar detector alarm is also heard in the background via the SR10
while having an intercom conversation or a phone call. Please refer to
the SR10 User's Guide for details.
Parallel Connection of SR10 and Mobile Phone by
Bluetooth Second Mobile Phone Pairing
Smart Phone
Two-way Radio
X-COM2
GPS
Sena SR10
Radar Detector
HFP
+
A2DP
Mobile Phone
Pairing
Second Mobile
Phone Pairing
HFP
Wired
Connection
Wired
Connection
Wired
Connection