104
4. BASIC OPERATION
MULTIFUNCTION GENERATOR
When the sweep mode is single-shot or gated single-shot, [Trig] (trigger condition) must be
set. ) p. 90
Set the following items as needed.
• Marker duty [Marker] (2nd page of setting screen) ) p. 92
• Stop level [StpLvl] (3rd page of setting screen) ) p. 89
This setting can be used only for gated single-shot sweep.
• External control with multi-I/O connector [ExtCtrl] (3rd page of setting screen) ) p. 94
• Oscillation stop unit for gated single-shot sweep [OscStop] (3rd page of setting screen)
) p. 89
This setting can be used only for gated single-shot sweep.
• Sync output [SyncOut] (3rd page of setting screen) ) p. 92
To Next Page
Loading...
